|Product Name || solar street lamp |
|Light Power || 25W |
|LED Chips ||SMD3030*56PCS |
|Solar panel ||18V 30W (solarworld monocrystalline silicon) L670*W320*H50mm |
|Battery ||12.6V,14AH Li-battery |
|Luminous flux ||2000-2500lm |
|Discharge Time ||Full power 15 hours,Half power 30 hours |
|Charge Time ||6 hours |
|Installation Height ||4-5M |
|Installation Distance ||15-20M |
|PIR sensor ||10-12m,140 degrees angle |
|CCT ||2700-3000K 4000-4500K 5500-6000K |
|Working time ||Light 10 to 12 hours every day, sustainable 3-5 rainy day |
|Switching mode ||time control + light sensor control+ motion sensor control |
|Light body material ||Aluminium alloy |
|Warranty ||3 years |
|Application ||street lighting; sidewalk lighting;roadway lighting; fence lighting; pathway lighting; campus lighting; park lighting; garden lighting;ramp lighting;boat dock lighting; remote area lighting; farm & ranch lighting. |
Easy installations, no electrical bills: solar powered led streetlight, can be mounted on wall or pole, that in direct sunlight for charging.
Motion and light sensor built in:solar streetlight goes on at dusk at 50% brightness. Can go from 50% power to full brightness when motion is detected. Three Intelligent Modes: Bright / DIM / Recharge.
1.Bright: motion activates for lighting when motion is detected for security light and to save battery;
2.DIM: 50% lighting for saving power when no motion;
3.Off/Recharge: automatically turns off in daylight and goes into recharge mode.
Infrared body sensor , Microwave induction
With infrared body induction controlled technology, it can store energy during the daylight,
when people pass through at night it auto modulate on/off.
During the night, the light can work automatically controlled by the smart sensor;
when people pass throught and on energy-saving mode, It will be on bright mode.
(working mode can be adjusted according to client's demands).